Payment & Shipping Terms:
|Maximum Capacity:||20m3/h||Material:||Stainless Steel Or Carbon Steel|
|Service Life:||> 20 Years||Operation:||24 Hours Automatic Running|
copper concentrate machine,
Higher Separating Efficiency Flotation Separator With Smooth Quality
Flotation Separator is the abbreviation of flotation beneficiation machine, which refers to the mechanical equipment to complete the flotation process. In the flotation separator, the ore slurry treated with the added agent is stirred and aerated to selectively fix some of the ore particles on the air bubbles; it floats to the surface of the ore slurry and is scraped out to form a foam product, and the remaining part remains in the ore slurry. In order to separate minerals. There are many structural forms of flotation separator, and the most commonly used is mechanical stirring flotation separator.
Working Principle of Flotation Separator
The flotation separator is driven by the motor triangle belt to drive the impeller to rotate, which generates negative pressure due to centrifugation. On the one hand, sufficient air is mixed with the pulp, while on the other hand, the pulp is mixed with the medicine, while the foam is refined, so that the mineral adheres to the foam. Floating to the surface of the pulp again forms mineralized foam. Adjust the height of the shutter and control the liquid level so that useful foam is scraped out by the scraper.
Principle of Selecting Floatation Separator:
(1) An appropriate flotation separator should be selected according to the nature of the ore (such as selectability, selected particle size, density, grade, pulp, pH, etc.). In the case where the ore is relatively easy to select and the aeration volume is not required, a mechanical stirring flotation machine can be selected. In the case of coarse ore beneficiation, KYF, BS-K flotation machines and CLF coarse flotation separators are available. When the ore is easy to be selected, the selection size is fine, the grade is high, and the pulp Ph is low, a relatively high ore-rich flotation column can be selected (especially suitable for beneficiation operations).
(2) The flotation separator with corresponding specifications should be selected according to the scale of the plant. Generally speaking, large-scale flotation plants should use large-scale flotation machines, medium and small plants should use medium- or small-scale flotation machines, and the specifications and quantities of flotation machines should be determined through technical and economic comparisons.
(3) The selection operation is mainly to improve the concentrate grade. The flotation foam layer should be thinner in order to separate the gangue. It is not appropriate to use a large-scale flotation machine. Therefore, the flotation machine used for the selection operation should be used with coarse and The flotation machine used in the selection operation is different.
Technical Data of Flotation Separator:
|(m3/h)||Recycle pump||Air compressor||Skimming system||L/L1||W/W1||H/H1||(a) Water inlet||(b) water outlet||(c) sludge outlet|
Contact Person: Henry
Tel: +86 188 9987 6785