Payment & Shipping Terms:
|Wire Linear Speed:||0-40m/s||Cutting Length:||20-60m|
wire saw machine for granite,
diamond wire cutting machine,
PLC System Diamond Wire Saw Machine
High Torque And Easy Operation Plc System Diamond Wire Saw Machine:
Diamond Wire Saw Machine Features:
* High-configuration equipment adopts touch screen to control the system,which can realize the application of wireless control and remote monitor.
* To maintain the saw machine at the optimum condition,we adopt double frequency converter with PLC Factory Automation control and apply constantension control principle.The saw machine can automatically adjust the speed according to the load and size.
* There is no requirement for power phase while the machine is installed.It is unnecessary to identify or adjust the phase.
* Control it automatically,vary with the load,and adjust the speed scientifically.All in all,the machine at the optimum condition with those improvement.
* Adopted motor drive and installed optoelectronic switch so that the fly can work under the bad condition well.
This diamond wire saw machine has an independent guide rail on each of the four columns. The flywheel elevates and lowers along these guide rails. The flywheel works stably, which improves the service life of the diamond wire saw machine. Flywheel tension has a stable, constant stretch mode to enhance cutting accuracy. CNC system makes the diamond wire saw machine interface easy and flexible.Diverse.complex.2-dimensional surfaces can be processed. Guide wheel uses a four-layer sealed protection system to greatly improve cutting accuracy. The linear cutting speed can be adjusted according to different cutting requirements. The protective cover is waterproof and highly durable.
HK diamond wiresaw machine mission is to make no stone hard to cut in the world, to help customer save production costs. More than 30 years in the line of diamond tools industry technological innovation improves the cutting efficiency, and save the cost for end-users.
Stone Industry: developed Aluminum Plastic Laminated Panel, Honeycomb Laminated Panel, Ceramic Thin Marble Panel, Fiberglass Thin Granite Panel, Fire Proof Thin Granite Panel and other new stone products. Not only save stone (3-5mm super thin stone, the original 1-3cm reduced to 3-5mm), but also let stone products have properties (impact resistance, high-temperature resistant, fire resistant, light weight, large single size 140x280cm ), expanding the application of the stone (high-rise building interior wall decoration, airplane and yacht interiors).
Our diamond wire saw machine engineer's mission is to provide customers with advanced technology solutions for efficient tools production. 30 years’ practical experience in stone machinery industry contributes to rich experience and Technological advantage of diamond tools. machinery will fit the needs of customers with more sophisticated services to fulfill the mission.
Diamond wire saw machine is a fully automatic cutting machine for reinforced concrete and stone block. The machine is powerful and uses specially customized non-standard motors as the power source to ensure the efficiency and economy of cutting. The operation is relatively flexible and the easy to operate. The diamond wire saw can ensure that the cutting is straight and neat. It can be cut in reinforced concrete, ceramics, glass, and steel plates. The diamond wire saw machine features no vibration, low noise, accurate positioning, no dust during work High efficiency, which is widely used in reinforcement and transformation, cutting and demolition of houses, floors, beams, columns, etc.
The diamond wire saw machine is composed of motor drive, a flywheel, a guide wheel, and a wire saw chain (made of diamond material): its power comes from motor directly driving the driving wheel, which drives the rope to rotate and do cutting.
Advantages of Diamond Wire Saw Machine:
Powerful, special non-standard motor is used as the power source to ensure cutting efficiency and economy. The operation flexibility is relatively large and easy to operate. The diamond wire saw machine could meet the cutting depth that hydraulic wall saws cannot. The cutting operation depth is not limited too much, the working environment is more adaptable and the operation efficiency is much higher.
The diamond wire saw head is relatively heavy, which makes the cutting powerful and stable. In actual construction, you can fix the saw head directly by pressing the bottom corner with the concrete plate without hitting the implosion screw. This greatly reduces the damage to concrete cutting.
There is no need for a large amount of cooling water. Anyone who has used a hydraulic wire saw machine knows that the hydraulic pump station must use cooling water to reduce the problem in order to cool the oil temperature. The electric wire saw does not need a lot of cooling water, only the rope needs cooling water.
Technical Data of Diamond Wire Saw Machine:
|Main Motor Power KW||22||37||45||55||75|
|Linear Speed (m/s)||0-40||0-40||0-40||0-40||0-40|
|Max Cutting Length (M)||20-60||20-80||20-100||20-120||20-150|
|Machine Moving Motor(kw)||0.55||0.75||0.75||1.1||1.5|
|Lateral Move Length(mm)||260||350||350||450||550|
|Machine Move Speed(m/h)||0-40||0-40||0-40||0-40||0-40|
Contact Person: Henry
Tel: +86 188 9987 6785